Mikoterm TK-24 Professional - Electric boiler (70 kW, 4 bar)
Other variants
Installatiebedrijf
This product is available exclusively through an approved partner. Find an installer near you for personal advice and professional installation.
Get direct access to the range, personal partner support and professional purchasing terms.
- 70 kW for hospitals, campuses and logistics
- Max. working pressure 4 bar, tested 4.5 bar
- 10 kW modular groups, 3-s intervals
- Runtime-based control logic
- Auto pump with 2-min after-run
- Heavy-duty, corrosion-resistant build
- Multi-level safety system
High-performance heating for large facilities
The TK-24 Professional (70 kW, 4 bar) targets hospitals, university campuses, logistics hubs and office complexes where uptime is critical.
Maximum pressure and test values
This 4-bar model is pressure-tested to 4.5 bar. Powder-coated steel housing and reinforced flanges provide excellent corrosion resistance and rigidity.
Advanced control and modular output
Set 10–90 °C in 1 °C steps via LCD. 70 kW delivered in 10 kW groups with 3-second switching intervals; runtime-based rotation evens out wear.
Smart pump and load management
The pump is externally triggered and runs 2 minutes post-shutdown to remove residual heat; balanced switching improves efficiency and component life.
Safety and uptime
Continuous pressure/temperature monitoring with staged shutdowns; full isolation in critical events.
Audience and use
Professional/industrial use only; not for regular homes. Installed by certified contractors.
Support from Hewa
End-to-end project assistance, documentation and dependable fulfilment.
| Generals | |
|---|---|
| Item number | 382704 |
| EAN Code | 8606026610432 |
| Sizes ((LxWxH):) | 67 x 50 x 122 cm |
| Specification list | |
| Dimension (W×D×H) mm | 500x665x1220 mm |
| Weight (kg) | 130 kg |
| Water volume in boiler (L) | 90 L |
| Water pipe connection size | G 2" F |
| Max. concentration of glycol in the medium (%) | 30 % |
| Min. allowable working pressure (software) (bar) | 0.4 bar |
| Max. allowable working pressure (software) (bar) | 4 bar |
| Safety valve (bar) | 4.5 bar |
| Protection level | IP20 |
| Power supply | 3 Ph - 400/230V 50Hz |
| Power efficiency (%) | 99 % |
| Number of heating elements | 7 |
| Power distribution (kW) | 7 x 10 kW |
| Fuses of the heating elements (A) | 7 x 3p C25 A |
| Compact switch (36kA) with voltage release | Noark Ex9M1S 160A (36kA) |
| Nominal current (A) | 3 x 101.5 A |
| Recommended main fuses (A) | 3 x 125 A |
| Minimum cross-section of the power cable (mm²) | 3 x 35 mm² |
| Minimum cross-section of the protective conductor (mm²) | 1 x 25 mm² |
| Temperature range (°C) | 10 - 90 °C |
| Safety thermostat (°C) | 95 °C |
| Microprocessor thermoregulator (CPU) | EK_CPU_1_5 fw: vs15.03.005 |
| Communication with cascade / protocol | RS485_RTU / ModBus |
| Communication with BMS / protocol | RS485_RTU / ModBus |