Mikoterm TK-24 Professional - Electric boiler (60 kW, 6 bar)
Other variants
Installatiebedrijf
This product is available exclusively through an approved partner. Find an installer near you for personal advice and professional installation.
Get direct access to the range, personal partner support and professional purchasing terms.
- 60 kW output for industrial and large-scale installations
- 6-bar version, pressure tested up to 7 bar
- Reinforced steel construction with powder coating
- Microprocessor control with LCD interface
- Modular 10 kW heating groups
- Optimised pump and load distribution
- Multi-level safety system for industrial reliability
Electric heating for high-pressure systems
The Mikoterm TK-24 Professional - Electric boiler (60 kW, 6 bar) is built for industrial and commercial projects requiring high operating pressures.
6-bar design for heavy-duty use
The 6-bar version is reinforced and pressure tested to 7 bar. With steel housing, powder coating and durable connections, it is engineered for continuous heavy-duty operation.
Advanced microprocessor control
The LCD controller allows precise setting between 10 and 90 °C in 1 °C increments. Heating elements are grouped and switch in 10 kW steps, with 3-second intervals for grid stability.
Optimised pump management
The controller balances load across heating groups, reducing wear. The pump is activated by external signals and continues for 2 minutes after shutdown to dissipate residual heat.
Industrial-grade safety
Pressure and temperature sensors continuously monitor the system. In case of faults, elements shut down automatically; in critical cases, full power supply is cut off.
Support from Hewa
Hewa provides the Mikoterm TK-24 Professional (60 kW, 6 bar) with full technical documentation and project support for contractors and engineers.
| Generals | |
|---|---|
| Item number | 382606 |
| EAN Code | 8606026612344 |
| Sizes ((LxWxH):) | 53 x 40 x 117 cm |
| Specification list | |
| Dimension (W×D×H) mm | 400x530x1165 mm |
| Weight (kg) | 96 kg |
| Water volume in boiler (L) | 60 L |
| Water pipe connection size | G 1 1/2" F |
| Max. concentration of glycol in the medium (%) | 30 % |
| Min. allowable working pressure (software) (bar) | 0.4 bar |
| Max. allowable working pressure (software) (bar) | 6 bar |
| Safety valve (bar) | 7 bar |
| Protection level | IP20 |
| Power supply | 3 Ph - 400/230V 50Hz |
| Power efficiency (%) | 99 % |
| Number of heating elements | 6 |
| Power distribution (kW) | 6 x 10 kW |
| Fuses of the heating elements (A) | 6 x 3p C25 A |
| Compact switch (36kA) with voltage release | Noark Ex9M1S 160A (36kA) |
| Nominal current (A) | 3 x 87 A |
| Recommended main fuses (A) | 3 x 100 A |
| Minimum cross-section of the power cable (mm²) | 3 x 35 mm² |
| Minimum cross-section of the protective conductor (mm²) | 1 x 16 mm² |
| Temperature range (°C) | 10 - 90 °C |
| Safety thermostat (°C) | 95 °C |
| Microprocessor thermoregulator (CPU) | EK_CPU_1_5 fw: vs15.03.005 |
| Communication with cascade / protocol | RS485_RTU / ModBus |
| Communication with BMS / protocol | RS485_RTU / ModBus |