Filters
Loading…CGK-V2 LINE
Spare parts for SPRSUN CGK-V2 LINE heat pumps are used for service, maintenance, diagnosis and replacement of technical components within the heat pump system. This line includes valves, fans, compressors, sensors, control panels and PCBs.
For every part, always check whether the series, unit type, article number, connection, voltage, mounting position and technical configuration match the original specifications of the heat pump.
Brands
102 W Motor for SPRSUN Heat Pumps
Item no. 600088EAN 8721225901492
Request access
In stock
Added
CAREL Power+ Speed Driver for SPRSUN Heat Pumps
Item no. 600078EAN 8721225901607
Request access
In stock
Added
Controller Display with Display Cable for SPRSUN Heat Pumps
Item no. 600079EAN 8721225901591
Request access
In stock
Added
High Pressure Switch for SPRSUN Heat Pumps
Item no. 600080EAN 8721225901584
Request access
Low stock
Added
Flow Switch for SPRSUN Heat Pumps
Item no. 600085EAN 8721225901539
Request access
In stock
Added
Temperature Sensors for SPRSUN Heat Pumps
Item no. 600086EAN 8721225901515
Request access
In stock
Added
Relay for SPRSUN Heat Pumps
Item no. 600089EAN 8721225901485
Request access
Op nalevering
Added
Pressure Gauge for SPRSUN Heat Pumps
Item no. 600090EAN 8721225901461
Request access
In stock
Added
Low pressure sensor 34.5 bar 500 PSI
Item no. 600081EAN 8721225901690
Request access
In stock
Added
Low Pressure Switch for SPRSUN Heat Pumps
Item no. 600083EAN 8721225901560
Request access
In stock
Added
Panasonic Compressor 9RD220ZAA2J for SPRSUN Heat Pumps
Item no. 600076EAN 8721225901621
Request access
Op nalevering
Added
CAREL PCB UP3A02200T3S0 for SPRSUN Heat Pumps
Item no. 600077EAN 8721225901614
Request access
In stock
Added
Expansion Valve for SPRSUN Heat Pumps
Item no. 600084EAN 8721225901546
Request access
In stock
Added
CG0716.HEX PCB
Item no. 600087EAN 8721225901508
Request access
In stock
Added
High pressure sensor 45 bar 650 PSI
Item no. 600082EAN 8721225901706
Request access
In stock
Added
SPRSUN CGK-V2 LINE spare parts for heat pumps
SPRSUN CGK-V2 LINE spare parts are used for service, maintenance, diagnosis and replacement of technical components in compatible heat pumps. This product line includes different parts for control, air-side operation, water-side circuits, refrigeration function and electronic system control.
The correct part selection depends on the series, unit type, article number, connection, voltage, mounting position and technical configuration. For every part, always check whether the specifications match the original component and the heat pump layout.
Important checks for CGK-V2 LINE spare parts
- Check whether the part is suitable for the relevant SPRSUN CGK-V2 LINE configuration.
- Compare the article number, connections, voltage, connector layout, cable length and mounting position with the original part.
- Inspect parts for wear, damage, moisture, corrosion, contamination, leakage or mechanical blockage.
- For electronic parts, also check PCB code, software version, hardware version, communication and control from the controller.
- Always assess related components such as sensors, PCBs, fans, valves, pumps, compressors, wiring and safety circuits.
Application, replacement and technical attention points
SPRSUN CGK-V2 LINE parts may need replacement when the heat pump shows error codes, components are no longer controlled correctly, measured values deviate, air-side or water-side operation is disturbed or visible component damage is present. A fault is not always caused by the part itself.
Installation and diagnosis of electrical, electronic, hydraulic and refrigeration heat pump parts must be carried out by a qualified technician. Refrigeration-related parts may require additional certification. After replacement, connection, settings, control signal, leak tightness, communication and full system operation must be checked.
Frequently asked questions about SPRSUN CGK-V2 LINE spare parts
What are SPRSUN CGK-V2 LINE spare parts used for?
These parts are used for service, maintenance, diagnosis and replacement of components in compatible SPRSUN CGK-V2 LINE heat pumps.
When should a part be replaced?
Replacement may be required in case of error codes, electrical failure, mechanical damage, leakage, abnormal readings, missing control signals or reduced heat pump operation.
Does every CGK-V2 LINE part fit every SPRSUN heat pump?
No, the correct choice depends on the series, unit type, article number, connection, voltage, mounting position, technical configuration and sometimes software or hardware version.
Can a fault also be caused by a related component?
Yes, faults can also be caused by sensors, wiring, PCBs, connectors, control components, hydraulic issues or refrigeration-related deviations.
Can a CGK-V2 LINE part be installed by the user?
Electrical, electronic, hydraulic and refrigeration-related parts must be installed by a qualified technician. Refrigeration work may require certification.