Filters
Loading…Hygiene boiler accessories
Hygiene boiler accessories are used for safe connection, measurement, control, protection and service of hygiene boilers. This includes inlet combinations, immersion pockets, magnesium anodes and electric heating elements that may be required for installation, maintenance or additional backup heating.
At Hewa, you will find accessories for hygiene boilers used with heat pumps, heating systems, solar thermal systems, wood boilers and pellet boilers. When selecting the right component, check connection type, thread size, pressure rating, material, power supply, mounting position and compatibility with the tank.
Brands
Pentec Duco - Inlet combination valve 15 x 15 mm (6 BAR)
Item no. 428399EAN 8717065000570
Price excl. VAT€ 18,97Price incl. VAT€ 22,95
In stock
Added
OEG 211205050 - Brass Thermowell TH/TC 150 (G 1/2" M)
Item no. 345050EAN 4038222198452
Price excl. VAT€ 9,88Price incl. VAT€ 11,95
In stock
Added
ENS 1248495 - Magnesium Anode for Water Heaters (G 1/2" M)
Item no. 878495EAN 5022050013444
Price excl. VAT€ 11,98Price incl. VAT€ 14,49
In stock
Added
MB 3000 OWR1/230V - Electric heating element (3 kW)
Item no. 403230EAN 8721082877404
Price excl. VAT€ 115,66Price incl. VAT€ 139,95
In stock
Added
Bonfix 52805 - Inlet combination valve (8 BAR) 15 mm compression
Item no. 119482EAN 8717845528058
Price excl. VAT€ 20,00Price incl. VAT€ 24,20
In stock
Added
HydroMix Mixing Valve - Domestic Hot Water +35 to +65 °C (15 mm)
Item no. 430415EAN 8721082877602
Price excl. VAT€ 72,30Price incl. VAT€ 87,48
Low stock
Added
OEG 512245033 - Solar station with solar circulation pump PWM
Item no. 345033EAN 4023854910293
Price excl. VAT€ 363,60Price incl. VAT€ 439,95
In stock
Added
OEG KSW - Differential controller with 4 TF/PT sensors
Item no. 340085EAN 8721225900716
Price excl. VAT€ 206,61Price incl. VAT€ 250,00
Op nalevering
Added
Selecting hygiene boiler accessories
Hygiene boiler accessories are used to connect a hygiene boiler correctly, protect it safely, measure accurately or provide electric backup heating. Since a hygiene boiler works with heating water inside the tank and domestic water through a stainless steel coil, components must always be selected for the correct side of the installation.
The correct choice depends on the hygiene boiler type, connection size, pressure rating, thread, material version, power supply and mounting position. Inlet combinations are used on the domestic water side, immersion pockets are used for sensors or thermostat probes, magnesium anodes support protection and maintenance, and electric heating elements can serve as backup heating or an additional heat source.
Important when choosing hygiene boiler accessories
- Check whether the component is intended for the domestic water side, heating water side or electric backup heating
- Match inlet combinations to pressure rating, pipe diameter and cold water connection
- Select a suitable magnesium anode for protection and periodic maintenance
- Use immersion pockets for correct placement of sensors or thermostat probes
- Select electric heating elements based on capacity, voltage, thread and material
- Check compatibility with volume, tank design, connections and technical documentation
- Have electrical components and safety parts installed by a qualified installer
Accessories for measurement, protection and maintenance
Hygiene boiler accessories must technically match the tank design, domestic water coil, heat source and safety components of the installation. For the related tank version, steel hygiene boiler with stainless steel domestic water coil is relevant. Also review the broader category buffer tanks and boilers for additional storage and domestic hot water solutions.
During installation, pressure protection, sensor placement and electrical connection must be carried out correctly. An immersion pocket must be positioned at the correct measuring point, an anode must remain accessible for inspection and a heating element should only be used when capacity, voltage and thread match the technical specifications of the hygiene boiler.
Frequently asked questions about hygiene boiler accessories
What are hygiene boiler accessories used for?
Hygiene boiler accessories are used for connection, protection, measurement, maintenance and possible electric backup heating of hygiene boilers with a heating water buffer and stainless steel domestic water coil.
Which components belong to a hygiene boiler?
Commonly used components include inlet combinations, immersion pockets, magnesium anodes and electric heating elements. Which parts are required depends on the tank type and system layout.
What is an immersion pocket used for?
An immersion pocket is used to position a sensor, thermostat probe or measuring element at a suitable measuring point in or near the hygiene boiler.
Why is a magnesium anode important?
A magnesium anode helps provide additional boiler protection and is important for maintenance and service life. Always check whether the anode is suitable for the specific tank and follow the maintenance instructions.
Who should install hygiene boiler accessories?
Safety components, electric heating elements and technical fittings must be installed correctly and safely. This should preferably be carried out by a qualified installer.