Filters
Loading…Sensors
Sensors for SPRSUN CGK-V2 LINE heat pumps are used to measure, monitor and transmit technical values within the system. These include temperature, pressure, flow and safety signals required for correct control operation.
When replacing a sensor, always check whether the sensor type, article number, measuring range, connector, cable length, mounting position and technical configuration match the original sensor in the heat pump.
Brands
Sensors for SPRSUN CGK-V2 LINE heat pumps
Sensors are used within SPRSUN CGK-V2 LINE heat pumps to measure, monitor and transmit technical values to the controller. They may relate to temperature, pressure, flow, safety functions or other system values required for stable heat pump operation.
The correct sensor depends on the series, unit type, article number, connection, voltage, sensor type, measuring range, connector, cable length, mounting position and technical configuration. Always check whether the sensor matches the original specifications of the unit.
Important checks for sensors
- Check whether the sensor is suitable for the relevant SPRSUN CGK-V2 LINE configuration.
- Compare the article number, sensor type, measuring range, connector, cable length and mounting position with the original part.
- Inspect the sensor and cable for moisture, corrosion, breaks, damaged insulation or loose plug connections.
- During diagnosis, check for error codes, abnormal readings, illogical display values or interrupted signal transmission.
- Also assess related components such as PCB, controller, wiring harness, connectors and the circuit in which the sensor measures.
Application, replacement and technical attention points
Sensors may need replacement when the heat pump shows error codes, measured values clearly deviate, communication is missing or when cable breakage, moisture ingress or physical damage is present. An error code does not always mean that the sensor itself is defective.
Installation and diagnosis of electronic heat pump parts must be carried out by a qualified technician. After replacement, the measured value, signal transmission, connector, cable routing, parameter settings and full system operation must be checked.
Frequently asked questions about sensors
What are sensors used for in a heat pump?
Sensors measure and monitor technical values such as temperature, pressure, flow or safety signals and send this information to the heat pump controller.
When should a sensor be replaced?
Replacement may be required in case of error codes, abnormal readings, cable breaks, moisture issues, corrosion, damage or when the sensor no longer provides a reliable signal.
Does every sensor fit every SPRSUN CGK-V2 LINE heat pump?
No, the correct sensor depends on the series, unit type, article number, sensor type, measuring range, connector, cable length, mounting position and technical configuration.
Can a fault also be caused by wiring or the PCB?
Yes, error codes or illogical readings can also be caused by cable breaks, loose connectors, moisture, corrosion, PCB issues or a fault in the circuit being measured.
Can a sensor be installed by the user?
Because sensors are part of the electronic control system of the heat pump, installation and inspection must be performed by a qualified technician.