Filters
Loading…Springs and turbulators
Springs and turbulators for Kepo MC and AC pellet boilers are used in the flue gas path and heat exchanger of the boiler. They help improve heat transfer, slow down the flue gas flow and support efficient boiler operation.
When replacing these parts, always check the exact Kepo model, output, version, part number, length, diameter, mounting position and technical design. This helps prevent incorrect fitment, reduced heat transfer or issues during cleaning and maintenance.
Brands
Kepo MC and AC springs and turbulators for pellet boilers
Springs and turbulators for the Kepo MC and AC Series are used in the flue gas path and heat exchanger of the pellet boiler. These parts create turbulence in the flue gas flow, allowing heat to be transferred more effectively to the boiler water.
The correct selection of springs and turbulators depends on the Kepo model, boiler output, series, part number, length, diameter, mounting position and technical design. Always check the original component and boiler documentation before replacing a set.
Important checks for Kepo springs and turbulators
- Check whether the springs or turbulators are suitable for the correct Kepo MC or AC series.
- Compare part number, length, diameter, shape, mounting position and version with the original component.
- Look for deformation, corrosion, wear, breakage, stuck parts, deposits or heavy contamination.
- Check the flue gas path, heat exchanger, cleaning mechanism and any fault codes or efficiency complaints.
- Also assess connected components such as the flue gas fan, sensors, seals, burner pot and flue gas extraction.
Application, replacement and technical points of attention
Kepo springs and turbulators are often inspected during periodic maintenance, heat exchanger cleaning or when there are issues with contamination, reduced heat transfer, abnormal flue gas temperature or efficiency loss. Damaged or deformed parts can affect the flow and cleanability of the flue gas path.
Inspection and replacement should be carried out by a qualified technician familiar with pellet boilers. After installation, the position, free movement, heat exchanger, flue gas extraction, seals, fan operation and combustion must be checked carefully.
Frequently asked questions about Kepo MC and AC springs and turbulators
What are Kepo springs and turbulators used for?
These parts are used in the flue gas path and heat exchanger of the pellet boiler. They create additional turbulence, which improves heat transfer.
When should springs or turbulators be replaced?
Replacement is usually required in case of breakage, deformation, heavy corrosion, wear, missing parts or when the heat exchanger can no longer be cleaned correctly.
Does every spring set fit every Kepo MC or AC pellet boiler?
No, the correct set depends on the model, output, version, part number, length, diameter and mounting position. Always compare it with the original component.
Can efficiency loss also be caused by another part?
Yes, efficiency loss can also be caused by contamination, poor combustion, an abnormal flue gas fan, incorrect pellet feed, leaking seals or issues in the flue gas path.
Can users replace springs and turbulators themselves?
Because these parts affect flue gas flow, heat transfer and safe boiler operation, inspection and replacement by a qualified technician are recommended.