Filters
Loading…Heating tapes
At Hewa you will find heating cables for ALPS EXCLUSIVE ARTIC and URBAN LINE heat pumps. Heating cables are used as electrical heating components for frost protection and temperature support in specific areas of the heat pump installation.
Always check the exact heat pump model, product line, article number, length, connection, voltage and technical version before ordering. This helps prevent incorrect installation and ensures that the heating cable is suitable for the specific application.
No results.
Heating cables for ARTIC and URBAN LINE heat pumps
Heating cables are used in ALPS EXCLUSIVE ARTIC and URBAN LINE heat pumps to electrically heat specific components or protect them at low temperatures. They support system operation in areas where frost protection, temperature support or local heating is required.
When replacing a heating cable, it is important that it matches the correct heat pump series, length, connection, voltage and mounting position. Always check the original component and compare the technical data before installing the new heating cable.
Important when selecting heating cables
- Check whether the heating cable is suitable for ARTIC or URBAN LINE
- Compare length, output, voltage and connection with the original part
- Check the correct mounting position inside the heat pump
- Inspect cable routing, plug and fastening
- Avoid kinks, damage or incorrect positioning of the heating cable
- Safely switch off the heat pump before replacing the part
- Have electrical work carried out by a qualified technician
Application and replacement
A heating cable can be used to support pipes, component zones or vulnerable areas inside the heat pump at low outdoor temperatures. If the heating cable is defective, loose or no longer heats correctly, this may affect protection, operational reliability and fault-free performance.
After installation, check that the heating cable is securely fixed, not pinched and correctly connected. Test its operation according to the service steps of the relevant heat pump and check that there are no fault messages or loose connections.
Frequently asked questions about heating cables
What is a heating cable used for?
A heating cable is used to electrically heat or support specific areas of the heat pump at low temperatures. This can contribute to frost protection and reliable operation.
Are heating cables universal?
No, heating cables differ in length, output, connection and application. Always check whether the part is suitable for the relevant ARTIC or URBAN LINE heat pump.
When should a heating cable be replaced?
Replacement is required when the heating cable is damaged, no longer heats, is loose, causes a fault or is diagnosed as defective during service.
What should I check during installation?
Check the correct position, cable routing, fastening, connection and free placement of the heating cable. The part must not be kinked, pinched or installed in the wrong position.
Can Hewa help check the correct heating cable?
Yes, Hewa can support the verification of the correct application. Preferably provide the heat pump type, article number and a photo of the original heating cable.